Description: ATmega328P Nano Type-C-Controller Board Soldered Compatible with Arduino Nano V3 w/ cable Plus Assorted Accessories Over 100 Items Include Ultrasonic, PIR, ADC Modules Ships from US. Plus all the extras listed below, over 100 additional items 1x Nano Expansion Board 6 Sensor Modules1 Clock Module1 Keyboard Module1 Communication Module 1 Expansion Board ATmega328P Nano Type-C-Controller Board Soldered Compatible with Arduino Nano V3 w/ usb cable Type C Parameter Processor: ATmega328 Working voltage: 5V Input voltage (recommended): 7-12V Input voltage (range): 6-20V Digital IO pins: 14 (6 of which are used as PWM outputs) (D0~D13) Analog input pins: 6 (A0~A5) IO pin DC current: 40mA Flash Memory: 32KB (of which 2KB is used for the bootloader) SRAM: 2KB EEPROM: 1KB (ATmega328) USB to serial chip: CH340 Working clock: 16 MHZ Type-C USP The header pins has been soldered for this package. It uses the chip ATmega328PU CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper. It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system. It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications. And that is not all you also get 1x ADS1115 ADC Analog-to-Digital Converter Module with Programmable Gain Amplifier 16 Bit I2C 2.0V To 5.5V1x PIR Sensor HC-SR501 Adjust IR Pyroelectric Infrared Motion Detector Module 1x DS3231 AT24C32 IIC RTC Module Clock Timer Memory Module 1x Ultrasonic Wave Detector HC-SR04 HCSR041x Ttp22916-Way Touch Module, Capacitive, Touch Switch Digital Touch Sensor Module1x ACS712/ACS712T Current Sensor Module1x HW-597 USB 2.0 to TTL UART Module Serial Converter CH340G 6 Pin1x Color Sensor TCS34725 Color Sensor Recognition Module RGB 1x MQ135 Air quality Sensor1x Accelerometer Module+ 3 Axis Gyroscope Sensor for MPU-6050 1 × pin header 1 × USB cable 1 × 400-hole breadboard 6 × Button with button cap (yellow) 5 × Plug-in LED yellow 5 × Plug-in LED Green 5 × Plug-in LED Red5 x IR LEDs 4 × Male-to-male wires 20cm 1 × 9V battery button 2 × Photoresistor 10 × Resistance 100R 10 × Resistance 1K 4x Male-Female jumper wires 2x Capacitor 100uf 16v 2x Capacitor 2200uf 21x10 16v 2x Capacitor 10uf 25v 8x4 2x Capacitor 220uf 25v 12x8x 2x Capacitor 330uf 25v 12x10 2x Capacitor 470uf 25v 13x8 2x Capacitor 680uf 25v 17x10 2x Capacitor Tantalum 10uF 16V5x 1N4007 Diodes5x 1N60 Diodes1x Alligator Clips to Dupont male 1x10 20cm 10 Lines1x Alligator Clips to Dupont Female 1x10 20cm 10 Lines2x BC516 - PNP Darlington Transistor 2x BC517 - NPN Darlington Transistor 1x Fan 40x10mm 12v 2x MAC97A6 4 Quadrants Triac2x Microphones Electret 9x7.7mm Microphones2x Tilt Switch SW-520D2x ULN2003APG ULN2003 Darlington Transistor Array 7-Channels Nano Expansion Board for Nano I/O EXPANSION SENSOR --- Lead out all digital IO ports and analog IO ports, each IO port has a standard positive and negative power supply interface Lead out the I2C interface on the main board to facilitate the connection with the I2C device Increase the DC power interface - the power supply current of the USB interface on the board is actually only 50MA, which is not enough when a high-current device is needed. In this case, an external power supply is provided at the DC power interface to ensure the stable running of the device. 8-PIN ANALOG OUTPUT --- with output power and GND,1 Servo power input, the barrel connecter input voltage range is 6-12 volts producing a stabilized 5v at 1A 14 I / O Pin --- servo type with GND, power and signal,Lead I2C interface to main board, convenient and I2C device connection OUTPUT --- 3.3V output,Size:6x5.3x1.5cm(2.36 x 2.08 x 0.59inch)
Price: 79.99 USD
Location: Los Angeles, California
End Time: 2024-11-21T03:00:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Arduino
Type: ATMEGA328P-AU
EAN: Does not apply
Unit Type: Unit
Model: Nano
UPC: Does not apply
MPN: Nano3.0Kit
Country/Region of Manufacture: China
Unit Quantity: 1
