DM2800 Opticum DiSEqC H to H Motor and Mount for up to 1.2 Meter Satellite Dish

Description: DM2800 Opticum DiSEqC H to H Motor and Mount for up to 1.2 Meter Satellite Dish Specifications: DM2800 Opticum DiSEqC H to H Motor and Mount Compatiable with All DiSEqC 1.2 Receivers Drive Satellite Dish up to 1.4 Meters (30lbs Maximum) at High Speed Quick Installation by only 1 Coax Cable to power both the Motor and the LNBF DiSEqC 1.3/"Go To X (USALS) function" 60 positions Metal Gear Motor Shaft - 2" / 50MM OD Adjustable Hardware Limits Easy Installation with LED Indicator Manual EAST / WEST button Adjustable Dish Tube / Shaft For Dish up to 1.4 Meters Motor rotation angle: 150° (80° East ~ 80°West) max. Rotation speed: 1.9°/s(13V) 2.5°/c(18V) Power consumption: 50 mA (Standby) / 200 mA (Normal operation) / 350 mA (Maximum) Increased Precision Increased ReliabilityHigh Efficiency Compact Structure Ultra Low Noise We tested this motor out at several different locations in the US on 1 Meter and 1.2 Meter steel satellite dishes and have been pleased with the results. The Shaft size on the Motor is 2" / 50MM OD. If your using the GEOSATpro 1.2 Meter Satellite dish, you will need to sleeve the shaft to a larger size to fit the AZ/EL Mount tight. You can use a piece of 2" ID PVC to make a sleeve to increase the shaft size to 60MM / 2.375 Inches so it fits the GEOSATpro 1.2 Meter Satellite Dish which accepts a shaft size of Minimum: 55mm (2.16"), Maximum 76 mm (3"). Best to make the sleeve about 4 1/2" long - 2" ID and make a cut long ways, to make it able to flex, to be able to get it over the ridge end on the motor shaft. I used several 1/2" round sticky intertube patches on the inside of the PVC sleeve, so when the sleeve is compressed in the clamp on the satellite dish, it will tighten good and not slip. HTML clipboard

Price: 199 USD

Location: Blue Springs, Missouri

End Time: 2024-10-05T01:11:42.000Z

Shipping Cost: 20 USD