Description: About this item 【Large Thermostat】The drying box has a large internal space for 2 rolls of 1kg filament / 1 roll of 3kg filament at the same time.Suitable for 1.75mm/2.85mm/3mm and other specifications of filamentA total of 8 holes are set on the shell for multi-directional line out to meet multiple printers or multiple printers at the same time. 【Good drying effect】The drying box uses 110W PTC heater for more even heating space.The PTC heater is also known to be durable, energy saving and environmental friendly. The core components are made of VO flame retardant material. Built-in temperature protection switch, over temperature automatically trips. This will be even safer. 【Adjustable heating temperature】The drying temperature can be set and the operation process is easy. The heating time can be set to suit your requirements, with countdown settings from 0h to 48 hours and shutdown to the minute. You can also set unlimited heating. 【Optimised heating method / real time temperature monitoring】 Real time monitoring of the temperature inside the chamber, using closed loop intermittent heating method to keep the temperature inside the chamber constant; unique air duct design makes the drying box conform to the principle of air thermodynamics, the filament is heated more evenly, the humidity inside the chamber can be reduced to 10%. 【Deflector hood】 Only blow dry the printing consumables, when not printing, use the deflector hood to prevent the hot air from blowing directly on the printing consumables causing deformation. The drying box has a technological design with a visible top lid and a stainless steel fingerprint resistant metal base, which provides a clear overview of the current status of the remaining material. Independent humidity detector, digital display. The measuring range is 10 to 99%. When CYCLOPES is in operation, the humidity level in the box can be up to 10%. The drying temperature can be adjusted and the operation process is simple. The temperature can be set in a wide range up to 70 ° C. The basic components of CYCLOPES are made of flame retardant VO materials. A built-in temperature protection switch is also included ， automatic tripping in the event of overheating. This makes CYCLOPES even safer. 4 sets of filament rack bearing Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of 3kg filament at the same time. Visualize temperature / humidity / time The heating time can be set according to your wishes, the countdown is set from 0h to 24h and it is switched off to the minute. You can also heat indefinitely. With this setting, Filament Dryer is in the normally open state. Optimized heating method The hot air heating makes drying more efficient; Due to the unique air duct design, Filament Dryer corresponds to the principle of air thermodynamics and the filament is heated more evenly. Memory setting parameters The parameters last set can be saved automatically and are not affected by a power failure. Dry & print at the same time Real time monitoring of the temperature inside the chamber, using closed loop intermittent heating method to keep the temperature inside the chamber constant Fire retardant material The core components of Filament Dryer consist of VO flame retardant materials. A built-in temperature protection switch is also included ， automatic triggering via temperature, making the CYCLOPE even safer. On Jul 4, 2024 at 03:35:30 PDT, seller added the following information:
Price: 90.63 USD
Location: Fontana, California
End Time: 2024-08-04T07:51:30.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: FIXDRY
Type: 3D Printer Filament Dryer Box
Material: Polyethylene Terephthalate Glycol
Filament Diameter: 1.75mm 2.85mm 3.00mm
Color: Black
