Fluke Networks OFP-QUAD OptiFiber Pro SM MM QUAD Fiber OTDR Module VFL OFP DSX

Description: The Following Items Are Included: Fluke Networks OFP-QUAD OptiFiber Pro SingleMode MultiMode Quad OTDR Module (BC# 45480-L/T*) MM OTDR Source: 850nm 1300nm SM OTDR Source: 1310nm 1550nm VFL (2) SC Connectors (1) MMC-62.5-SCSC Fiber Cable (1) SMC-9-SCSC Fiber Cable BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke Networks OptiFiber Pro SM MM Quad Fiber OTDR Module w/ VFLDynamic Range:850 / 1300 nm : 28 / 30 dB1310 / 1550 nm : 32 / 30 dBVisual Fault LocatorIncludes Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 1 YEAR WARRANTY Fluke Networks OptiFiber Pro OTDR ModuleDesigned for Enterprise FiberAs enterprise networks and datacenter architectures evolve, IT infrastructure administrators demand better OTDR technology to maintain fiber network performance. Many OTDRs (Optical Time Domain Reflectometers) used for fiber troubleshooting are designed for carriers and contain cumbersome and complicated features that enterprise users don’t need. Few OTDRs are built with features and usability for enterprise network engineers, SAN designers and cable installers.As enterprises consume more storage resources and adopt higher bandwidth (40G, 100G) datacenter architectures, the resilience of the cabling infrastructure becomes highly dependent upon maintenance tools to ensure fiber reliability. OptiFiber Pro is the industry’s first purposebuilt OTDR that meets the unique challenges of an enterprise fiber infrastructure. With its simple Taptive user interface and powerful feature set, the OptiFiber Pro turns anyone into an efficient and expert premise fiber troubleshooter or installer.Unique Features: SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. Not only does this halve network-testing time, but it also eliminates the need to travel to the far end of the connection to perform tests. Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels. LinkWare management software provides unmatched analysis of test results and professional test reports Performance: Test times as short as two seconds in Quick Test mode Quickly test datacenter fiber with pre-programmed settings Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultra short dead zones Easily characterize all connectors, splices and areas of high loss with graphical EventMap™ view ProjX management system increases return on investment by enabling OTDR project sharing among users and different jobs Reduce network downtime by quickly and precisely identifying faults on all fiber types Built-in Visual Fault Locator (VFL) easily identifies damaged fibers. Standards: Full OTDR capability that certifies fiber performance based on industry standards or customer specifications Compliant with ISO and TIA standards Unique Certification with Flexibility and EfficiencyAn important aspect in maximizing an OTDR’s value is to properly plan its day-to-day usage. With ProjX management system, OptiFiber Pro allows a project manager to define each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certification and reporting.Advantages: Powerful ProjX management system facilitates OTDR sharing with clear job assignment for each operator Easy monitoring of job progress with pass/fail results Built-in Visual Fault Locator (VFL) to facilitate troubleshooting On-screen report generation and upload to LinkWare™ application Taptive User InterfaceMost OTDRs are designed for a myriad of applications, causing the user interface to be difficult to navigate and interpret. OptiFiber Pro has the Taptive user interface which combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.Extremely short event and attenuation dead zoneThe OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.5 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area network environments.Two second trace per wavelength Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap event, Table or Trace. The end result is less time spent testing and more time performing other tasks.DataCenter OTDR™ ModeWith a simple one-touch selection, users enter DataCenter OTDR mode – without setup time for fine tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters – enddetection algorithms, pulse widths – without getting confused by the short links or number of connectors.Graphical EventMap™ viewTo eliminate the learning curve associated with reading an OTDR trace, OptiFiber Pro’s advance logic automatically interprets the information to create a detailed and graphical map of events that includes connectors, splices and anomalies. To accommodate different preferences, users can easily switch between the EventMap, the Event Table and the Trace for test details. Any faulty events will be highlighted with RED icons to facilitate quick troubleshooting.On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-toread, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.Dynamic project and user profile management with ProjX management systemOptiFiber Pro enhances job efficiency by allowing the project manager to create and manage operator and job profiles per project. Defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.SmartLoop OTDRSmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end.Specifications: Quad OTDR Module Specifications Wavelengths 850 nm +/- 10 nm, 1300 nm +35/-15 nm, 1310 nm +/- 25 nm, 1550 nm +/- 30 nm Compatible fiber types 50/125 μm, 62.5/125 μm, Singlemode Event dead zone 850 nm: 0.5 m (typical), 1300 nm: 0.7 m (typical)1310 nm: 0.6 m (typical), 1550 nm: 0.6 m (typical) Attenuation dead zone 850 nm: 2.5 m (typical), 1300 nm: 4.5 m (typical) 1310 nm: 3.6 m (typical), 1550 nm: 3.7 m (typical) Dynamic range 850 nm: 28 dB (typical), 1300 nm: 30 dB (typical) 1310 nm: 32 dB (typical), 1550 nm: 30 dB (typical) Max distance range setting MM: 40 km, SM: 130 km Distance measurement range 850 nm: 9 km, 1300 nm: 35 km, 1310 nm: 80 km1550 nm: 130 km Reflectance range 850 nm: -14 dB to -57 dB (typical), 1300 nm: -14 dB to -62 dB (typical)1310 nm: -14 dB to -65 dB (typical), 1550 nm: -14 dB to -65 dB (typical) Sample resolution 3 cm to 400 cm Pulse widths (nominal) 850 nm: 3, 5, 20, 40, 200 ns, 1300 nm: 3, 5, 20, 40, 200, 1000 ns, 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns Test time (per wavelength) Auto setting: MM - 5 sec (typical) SM – 10 sec (typical)Quick test setting: MM – 2 sec (typical) SM – 5 sec (typical)Best resolution setting: MM – 2 to 180 sec SM – 5 to 180 secFaultMap setting: MM – 2 sec (typical) MM – 180 sec (max) SM – 10 sec (typical) SM – 180 sec (max)DataCenter OTDR setting: MM – 1 sec (typical at 850 nm) MM – 7 sec (max) SM – 20 sec (typical) SM – 40 sec (max) Manual setting: MM - 3, 5, 10, 20, 40, 60, 90, 120, 180 sec SM - 3, 5, 10, 20, 40, 60, 90, 120, 180 sec VFL Specifications On/Off control Mechanical switch and a button on the touch screen Output power 316 µW (-5 dBm) ≤ peak power ≤ 1.0 mW (0 dBm) Operating wavelength 650 nm nominal Spectral width (RMS) ±3 nm Output modes Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) Connector adapter 2.5mm universal Laser safety (classification) Class II CDRH Complies to EN 60825-2 General specifications Weight Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) Dimensions Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in ( 6.67 cm x 13.33 cm x 27.94 cm) Battery Lithium ion battery pack, 7.2 volts Battery life 8 hr Auto OTDR operation, dual wavelength no video probe connected, 150 m of fiber Operating temperature -18ºC to 45ºC Non-operating temperature -30ºC to 60ºC Operating altitude 4,000 m (13,123 ft), 3,200 m (10,500 ft) with AC adapter Storage altitude 12,000 m EMC EN 61326-1 For full Fluke Networks Optifiber Pro Quad OTDR Module product specifications, please click here: Fluke Networks Optifiber Pro Quad OTDR Module Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 7895 USD

Location: Southgate, Michigan

End Time: 2024-08-29T13:57:30.000Z

Shipping Cost: N/A USD