Description: This is a replacement set of 2 Drum sticks for the blow mold The Little Drummer Boy from TPI. This is a 3d printed design created and printed by our family. The 1st and 2nd picture shows the drum sticks and how they fit in the blow mold. The original blow mold is shown for comparison only and is not included. The 4th picture shows the original drum sticks beside ours. These are shown for reference only. As you can see we have upgraded these from boring plain flat sticks to look more realistic as in color and shape to actual drum sticks. We have also added a stopper to hold in place, and not fall in the holes. The stopper is flat on the backside of each and there is some very minor roughness at the taper to the back to allow the print to print better for the whole length and front, but you just face these away from showing to the back of each slot. We size as accurately as possible to the original part with pin type push thru parts making several sets until we are happy with the results, but your blow mold holes may be slightly smaller or larger due to difference in wear. You may need to add a small amount of glue to hold in place or you can sand part or drill a tiny bit of the hole to make fit if too tight (do not force as we can’t damage our vintage blow molds).
Price: 10 USD
Location: Eddyville, Kentucky
End Time: 2024-12-29T01:01:28.000Z
Shipping Cost: 5.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Blow Mold
Material: Plastic
