Description: New message from: strawberryice (665Purple Star) It finally worked today!!!! I'm so happy! Thank you for your time and help. ReplyYour previous message not this one !! see photo for correct one. i need front and back of thisstrawberryice: Here you go pic attachedYour previous message please take a photo of the chip with wire connect ! from last photo i saw the connection is wrong. wait for your replystrawberryice: My husband looked at it and said I am hooking it up correctly from the picture you sent me. We don’t understand what you are saying is wrong? My husband is an electrician too.Your previous message No Problemstrawberryice: Oh wow ok..... ok I’ll try it again soon. I’m new at this. lol Thank you for your time and help! It is much appreciatedYour previous message you connect wire wrong !! please connect one wire to 5V on board and middle wire to D7 on board and last wire to GND on boardthen see this photo to do touchhttps://i.ebayimg.com/images/g/CooAAOSwO0VdljcI/s-l1600.jpg Each unit is checked and tested on a da vinci duo 2.0, or a 1.0 and a PRO printer before it gets shipped, so I know that every unit works, I have reset the same cartridges many many times and they still work perfectly. Just look at the feedback from my genuine customers. Each unit is checked and tested on a da vinci duo, pro and 1.0a printer before it gets shipped, so I know that every unit works, I have reset the same cartridges over 300 times and they still work perfectly. Resets to 240 meters Pla cartridge reset to 240m Easy to use, just 1. Turn off your printer 2. Remove the cartridge 3. Place the cartridge on the resetter 4. Switch button to on position 5. The led will flash then stay on for a second 6. Switch button off 7. Job done Model firmware Da vinci 1.0 1.1.G, 1.1.I, 1.1.J , 1.1.3 and the latest Da vinci 1.0a 1.0.1, 1.0.3, 1.0.5, 1.0.6* 1.2.2 and the latest Da vinci duo 2.0 2.0.J and the latest Da vinci aio 1.1.1, 1.1.3, 1.1.4, 1.1.5 1.1.6 and the latest Da vinci pro 1.3.0 and the latest Da vinci 1.1 plus 1.1.9.13 and software up to 2.1.10.3 and the latest Sorry it does not.... Work on a junior or a mini..... Notes: (*) only resets filament counter, no temperature control. Hotend Temp 210c ~ 235C Heated Bed Temp 90c Does set pla cartridge, but I use abs settings for my pla reels and I get perfect prints. I build these from scratch so it takes a day or three to get it done, with other printing jobs in line. Parts are 3d printed using a da vinci 3d duo printer, da vinci pro or da vinci 1.0a Colour selection on the slicer software might stay the same as original cartridge Colour of unit supplied may be different to picture..... (the design may change, but it will do the same job, trying to streamline the build process) This item is handmade to order, it is tested before I post,
Price: 22.98 USD
Location: San Jose, California
End Time: 2024-02-03T19:03:50.000Z
Shipping Cost: 4.98 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: 3dprestterelectonly
Country/Region of Manufacture: United States
Brand: 3d xyz reset
